{"product_id":"finnleo-himalaya-sauna-heater-himalaya-7kw","title":"Finnleo Himalaya 7.0 kW (240V 1PH) Sauna Heater","description":"\u003ch2\u003eFinnleo Himalaya 7.0 kW (240V, 1-Phase) Rock Tower Electric Sauna Heater\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFinnleo Himalaya 7.0 kW electric sauna heater\u003c\/strong\u003e is Finnleo's most popular heater upgrade and one of the most sought-after sauna heaters in the North American market. With its striking floor-standing rock tower design and stunning Nordic aesthetic, the Himalaya is as much a centerpiece of the sauna as it is a heat source. Named after the legendary mountain range whose meaning is \"home of the snow,\" the Himalaya draws on the same natural water cycle principle to deliver an authentic, soft, and enveloping löyly experience that has changed the sauna industry.\u003c\/p\u003e\n\n\u003ch3\u003eRock Tower Construction and Design\u003c\/h3\u003e\n\u003cp\u003eThe Himalaya features a floor-standing rock tower design that surrounds the heating elements with stone on every side. Each unit holds approximately \u003cstrong\u003e210 pounds of sauna rocks\u003c\/strong\u003e, giving it an exceptional mass of stone in direct contact with the heat. This generous rock capacity produces deep, soft heat and an abundant, gentle steam that sets the Himalaya apart from conventional sauna heaters. The heater is constructed with splash-proof housing, with all conducting parts protected against water exposure, and is ETL approved for permanent installation and electrical connection in accordance with national and local electrical codes.\u003c\/p\u003e\n\n\u003ch3\u003eStandard BWT (BioWater Technique)\u003c\/h3\u003e\n\u003cp\u003eEvery Himalaya heater comes standard with \u003cstrong\u003eBWT (BioWater Technique)\u003c\/strong\u003e, an integral water tank that hangs on top of the heating elements and emits a continuous, soft boil of water throughout the sauna session. This raises humidity in the room while allowing the air temperature to feel comfortably hot at lower readings. The combination of the large rock mass's soft heat and the humidity generated by BWT is described by Finnleo as a true \"game changer\" in the sauna industry, creating a noticeably more pleasant and comfortable bathing experience compared to traditional dry-heat units. To use BWT, the heater is allowed to warm up for approximately 20 minutes, after which roughly two cups of fresh water are added into the tank through the fragrance diffuser slots; a separate scent-only slot is provided for fragrance oils, which should never be added directly into the water reservoir. Water in the tank is entirely optional — the heater performs equally well as a traditional dry-heat unit if lower humidity is preferred.\u003c\/p\u003e\n\n\u003ch3\u003eFlexible Installation Options\u003c\/h3\u003e\n\u003cp\u003eThe Himalaya 7.0 kW heater is designed for versatile placement and can be used in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorner installations\u003c\/li\u003e\n\u003cli\u003eMid-sauna (middle of room) installations\u003c\/li\u003e\n\u003cli\u003eThrough-bench installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn optional glass ring accessory is available for in-bench designs, allowing the heater to look as beautiful as it is functional while blending seamlessly into custom sauna layouts. The heater mounts to the wall (or surrounding bench framing for center-of-room placement) using a supplied wall bracket that fits into any hexagon opening on the rear of the heater shroud, with adjustable leveling feet to ensure the unit sits perfectly plumb.\u003c\/p\u003e\n\n\u003ch3\u003eHeating Power, Room Sizing and Electrical Specifications\u003c\/h3\u003e\n\u003cp\u003eThe 7.0 kW version of the Himalaya (rated 6.8 kW actual output) is engineered for sauna rooms with a minimum floor area of approximately \u003cstrong\u003e21 square feet\u003c\/strong\u003e, covering room volumes from roughly \u003cstrong\u003e175 to 350 cubic feet\u003c\/strong\u003e, with a minimum wall height of 75\" and maximum wall height of 96\". This heater is configured for \u003cstrong\u003e208–240V, single-phase (1PH)\u003c\/strong\u003e electrical service. Recommended copper supply wiring (minimum 90°C rated) is 2 × #8 AWG + ground for both the power supply to the CB (contactor) box and from the CB box to the heater on 240V\/1PH circuits. All wiring must be installed by a licensed electrician in accordance with the National Electrical Code and local regulations, and the heater and control must be properly grounded per NEC to prevent electrical shock in the event of a unit failure. A GFCI device is not required by NEC for this equipment, though local codes may require one.\u003c\/p\u003e\n\n\u003ch3\u003eControl Compatibility — SaunaLogic2 (SL2)\u003c\/h3\u003e\n\u003cp\u003eThe Himalaya heater is designed to pair with the \u003cstrong\u003eSaunaLogic2 (SL2) control system\u003c\/strong\u003e, North America's first sauna control offering true worldwide mobile app functionality. Paired with the correct SL2 control and matching CB (contactor) box — CB 16-1 for single-phase or CB 16-3 for three-phase — the Himalaya delivers a complete smart-sauna experience, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMobile app control from anywhere in the world\u003c\/li\u003e\n\u003cli\u003eGlass touch-screen interface (3 3\/8\"W x 5 1\/2\"H x 1 1\/4\"D), weather- and water-resistant for indoor or outdoor mounting\u003c\/li\u003e\n\u003cli\u003eAdjustable temperature range from 119°F to 194°F (typical bathing temperature 150°F–165°F)\u003c\/li\u003e\n\u003cli\u003eAdjustable session duration up to 60 minutes\u003c\/li\u003e\n\u003cli\u003e24-hour pre-set time delay before start\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth connectivity for use with the optional SL2 audio kit\u003c\/li\u003e\n\u003cli\u003eBuilt-in RGBW light control with dimmer (25%, 50%, 75%, 100% brightness settings) and seven-color sequence: white, red, green, blue, yellow, aqua, purple, plus a rotating color mode\u003c\/li\u003e\n\u003cli\u003eCompatibility with the optional lighting package (3 to 8 light fixtures) and Saunachrome light kit for customizable ambient lighting\u003c\/li\u003e\n\u003cli\u003eBuilt-in high-limit safety control that automatically shuts off the heater if room temperature rises to an abnormal level, with a manual reset button located on the lower left side of the heater\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe CB (contactor) box measures 11-3\/8\"W x 8-1\/2\"H x 3-1\/2\"D and can be mounted inside or outside the sauna room. Finnleo specifies that only a contactor rated for 250,000 duty cycles should be used for replacement or service.\u003c\/p\u003e\n\n\u003ch3\u003eSafety, Ventilation and Room Construction Requirements\u003c\/h3\u003e\n\u003cp\u003eA wooden heater guard (fence\/rail) is required around the Himalaya to prevent accidental burns from contact, with a minimum clearance of 2-1\/2\" from the heater to wooden surfaces such as benches, side walls, and the guard itself. Benches must never be installed directly over the heater. Sauna rooms should be built with a minimum of R-12 insulation in 16\" on-center 2x4 stud walls, with a recommended minimum flooring thickness of 5\/8\". No electrical receptacles or showers may be installed inside the sauna room, and the sauna door must always open outward with no permanent locking mechanism. Proper ventilation requires a fresh-air inlet vent located directly below the heater and an air outlet positioned lower than the upper benches, as far from the heater as possible and roughly two feet higher than the inlet, sized per UL Specification 875 guidelines. Rocks must always fully cover the heating elements and should be placed loosely — smaller stones around the outer perimeter first, larger stones in the center — to allow proper air circulation; packing them too tightly can trip the high-limit safety switch. The heater should never be operated without rocks and the rock guard in place, and only the rock type supplied by Finnleo should be used, as substitutes may void the warranty.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHimalaya 7.0 kW rock tower heater unit with splash-proof, ETL-listed housing\u003c\/li\u003e\n\u003cli\u003eApproximately 210 lbs of Finnleo sauna rocks\u003c\/li\u003e\n\u003cli\u003eStandard BWT (BioWater Technique) integral water tank with fragrance diffuser slots\u003c\/li\u003e\n\u003cli\u003eWall mounting bracket with adjustable leveling feet\u003c\/li\u003e\n\u003cli\u003eThree metal warning\/caution placards for required mounting above the heater and on the exterior of the sauna door\u003c\/li\u003e\n\u003cli\u003eOption to order as Heater Only, or bundled with a matching SaunaLogic2 (SL2) control (Wi-Fi or non-Wi-Fi) and the correct CB (contactor) box for a complete, ready-to-install system\u003c\/li\u003e\n\u003cli\u003eCompatible optional accessories: glass ring for in-bench installation, SL2 audio kit, Saunachrome lighting package (3 to 8 fixtures)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose the Finnleo Himalaya\u003c\/h3\u003e\n\u003cp\u003eFinnleo, manufactured by Sauna360, is one of the most trusted and established names in authentic Finnish sauna heating. Every Himalaya heater is ETL safety tested and listed for use in North America, and the SaunaLogic2 ecosystem ties the heater, sauna lighting, and audio together into a single, app-controlled experience. Combining rugged construction, generous rock mass, standard BioWater Technique humidity, and full smart-control compatibility, the Finnleo Himalaya 7.0 kW heater remains Finnleo's best-selling and most recommended heater upgrade for anyone seeking an authentic, soft, and immersive Finnish sauna experience.\u003c\/p\u003e","brand":"Finnleo","offers":[{"title":"Heater Only","offer_id":48385846608113,"sku":"9053-972","price":3715.0,"currency_code":"USD","in_stock":true},{"title":"Heater + SaunaLogic2 Wi-Fi Control + Contactor Box","offer_id":48385846640881,"sku":"9053-972+SL2W+CB","price":5435.0,"currency_code":"USD","in_stock":true},{"title":"Heater + SaunaLogic2 Control (Non-Wi-Fi) + Contactor Box","offer_id":48385846673649,"sku":"9053-972+SL2N+CB","price":4925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0582\/6386\/3453\/files\/FinnleoHimalaya7kW00.webp?v=1783697653","url":"https:\/\/finnishsaunabuilders.com\/products\/finnleo-himalaya-sauna-heater-himalaya-7kw","provider":"Finnish Sauna Builders","version":"1.0","type":"link"}